- Ideal coating results with super-fine atomisation
- High variability thanks to individual adjustment of the spray jet with two shroud airs – depending on the workpiece geometry requirements, both a wide, soft spray pattern and a small, hard spray jet can be generated
- Minimum effort for assembly & maintenance thanks to sturdy turbine technology and components made from stainless steel
The WAGNER TOPFINISH RobotBell 1 is ideal for electrostatic applications with water and solvent-based paints. Thanks to its versatility and robust properties,
it allows perfect surface coatings in a wide range of areas – such as for workpieces in the automotive, metal, plastic or wood industry.
Technische Data
| Shaft bearing | Air bearing |
| Angle version | 60° |
| Maximum voltage | 70 kV (type A) or 100 kV (type B) |
| Nozzle sizes | Ø 0.8 / 1.1 / 1.4 / 1.7 mm |
| Bell disc - Size - Serration - Material |
30 mm / 50 mm / 70 mm Smooth, straight / cross serrated Consistal / titanium |
| Material volume | 25* - 800** ml/min |
| Spray jet diameter | Approx. 70 - 800 mm |
| Bearing air pressure | 5.5 bar |
| Drive air pressure | 0 - 8 bar |
| Brake air pressure | 0 - 6 bar |
| Shroud air pressure | 0.2 - 4.5 bar |
| Material pressure | Typically 0.5 - 2.0 bar Max. 8 bar |
| Material connections | G ¼” internal |
| Air connections | 4 / 6 / 8 mm |
| Max. material temperature | +50 °C |
| Ambient temperature | 0 °C to +40 °C |
| Temperature of turbine air | +15 °C to +50 °C |